Tip of the Day:Stain Boards

One of the biggest problems that I face when I am making a project for someone else is picking a color for the stain. Most of the time people just say that they want it oak or cherry which we all know if about as generic an answer as you can get. So when I got to the finishing stage for a recent bookcase I came up with the idea of creating a stain board to show the customer. This worked out well as I was able to show what the stain would look like from one coat to five coats.

The process that I used for this board was very simple. I put one coast on and let it dry at which point I put a piece of tape across the board. I put a second coat of stain on the left side of the piece of tape. I did the same steps over until I reached 5 different stages on staining.

Tip of the Day:Project Size

When constructing projects in your basement shops always remember to make sure that once they are completed they will fit out the door and up the stairs. I have heard many stories of people who have built book cases, cribs and beds and could not get them out of the basement. So measure twice plan and assemble in the garage if needed.

Tip of the Day:Clamp Storage

During my recent cleaning spree I decided to move my clamps to get them out of the way of my new shelves. This is a quick, cheap and easy way to hang your clamps and get them out of the way. I will probably relocate them at some point but this was a way to get them off the floor and make them easily accessible. I had a extra 2x4 lying around the shop so I grabbed a few screws and secured it to the open studs.

Tip of the Day: Wood Storage

The tip of the day will hopefully turn out to be a tip of the day but we will see how that goes. The first tip of the day will deal with wood storage. During the course of clearing out the shop and purging my cutoffs and leftovers I figured it would be a great idea to label my pieces. Most of the time I end up using oak but some time when people request something else and I have leftover it gets lost in the clutter of the oak. Will I was sorting the cutoffs I decided that I would label all of my pieces that were not oak so that I could quickly pick them out of the piles. When it comes to sheet goods I like to keep pieces around to use for stain samples and smaller projects. I tend to stack these pieces and seeing the grain is not always the easiest so I labeled these pieces to make it easier to pick out. Another thing that I just thought about while writing this tip is to write the measurements on each piece.

Wood Storage and what to do with leftovers

Currently am working on cleaning up my shop and getting rid of some of the cutoff pieces of wood that I have been saving. I had good intentions of keeping the cutoffs for future projects but they never seem to work with the project that I am working on. I am working on sorting through the cutoffs and separating them into a pile for the fire pit and another for sale/free. In the future I am going to always have two bins that I can put cutoffs in as I am working so that I do not end up with a stock pile of cutoffs. I am sure that there are many uses for the cutoffs that I have sitting around the shop but what I must do is weigh the pros and cons of keeping it in the shop. After going through the pros and cons the cons out weigh the pros at this time. I hope to have updates soon with photos of the lumber storage.

Shop Reorganization

I do not have a current project in the works so I am going to reorganize the shop. Currently I have a big shelving unit in one corner which tends to collect a lot of dust and stuff. it is pretty deep so things tend to get pushed to the back and lost. I am going to take this shelving unit out to create more floor space. I will be replacing this unit with one that is smaller and has wire shelves. I also have an assembly table(old desk) near the door. This table comes in handy when staining or putting things together but tends to get in the way more than it helps. My plan to replace this will be a folding table or saw horses. The other standard tools in my shop are the miter saw, table saw, router table and drill press. My goal for the reorganization is to utilize all the available space. I will post photos of the progress and let you know how it goes.

Stain and Finish Storage Completed

I just finished my latest project and had some time to complete my stain and finish storage I wrote about in a previous post. The problem that presented itself was a lack of storage for my pint and quart sized cans. Due to my shop size I got rid of one big shelving unit for a smaller one and did not have shelf space for these cans. So I came up with a simple alternative solution for this problem. I had some leftover 2x4's lying around my shop that were on there way to the burning pit when I realized I could use them for shelves between the studs in my wall. After a few cuts a couple of screws problem solved. This storage solution not only got the cans out of the way but it was practically free since the material used was going to get burned this weekend. Below are a few photos of the finished project.

Mobile Base

Since my stain/finish storage project is on hold until I finish my latest project and apply the finish I do not plan on doing any cutting of wood. I just applied the last coat so it should not be too long before I get back to that project.

I do have a product review for a mobile base. I recently purchased a mobile base for my table saw. I purchased the Port-a-Mate mobile base from Menards. This unit was reasonable priced at about $45. I have a contractors style table saw in the shop and need to move it when I need floor space to work on finishing or assemble. I usually push the table saw into the corner against the wall. This was tough to do before without the mobile base because I had to drag it over to the corner. It took a little time to assemble the base and get in under the saw. I would saw that it took about 15-20 minutes to figure out the size I need and put all of the nuts and bolts together. Once I finished Assembly and put it under the saw it was easy to change from a stationary position to a mobile position. Now I can move the saw with ease by simply pushing two levers on the wheels. So far the product has stood the test of my shop and the demand to move my table saw. I would recommend that you take a look at this mobile base if you are looking to purchase one for your shop.

Stain and finish storage

The next project that I am going to tackle in my basement shop is to come up with a storage for the quart size stain and finish containers. I am trying to maximize my floor space by reducing my shelves so putting them on a shelving system is not going to be an option. Since a few of the walls in my shop are unfinished and I can put some shelves in between the 2x4's I think that I have found my solution. This should allow me to free up some space on my shelves and keep the cans out of the way. This should keep them organized, out of the way and within reach. As this project evolves I will post photos and keep you updated.

A little about my shop

I currently operate my small woodworking business out of the basement of my home. I have been working out of my basement for about a year now. My shop is tucked away in the corner of my basement. The shop is in the shape of an "L" and shares the space with some utilities. Over the past year I have changed the layout and have come up with ideas that have helped me better utilize the space. There can be many drawbacks and challenges when working in the shop but there are also many positives. Some of the positives of working in a basement shop are that it is heated and close to home. Some of the drawbacks are that you need to carefully plan your projects and make sure that they will make it up the stairs and out the door. There is also the problem of dust getting everywhere and trying to manage to keep this to a minimum.